- Chinchilla cooling ice nest ceramic plateArduCam PTZ Lens and Controller

Title Default Title
Qty:

Description

  • ArduCam PTZ Lens and Controller
  • Designed for Raspberry Pi (Not included)
  • Offers Real PTZ with servos for directional control
  • Features varifocal lens for optical zoom
  • Switchable IR Cut for your day/night vision
  • Supports autofocus, pan, tilt, and zoom

The ArduCam PTZ Lens and Controller is an abbreviation for pan, tilt, and zoom and reflects the movement options of the camera, and a pan–tilt–zoom camera (PTZ camera) is a camera that is capable of remote directional and zoom control.

A PTZ camera is not a still camera. Instead, it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones.

You can save a lot of cost and time in purchasing and deploying the camera if a PTZ camera can handle the job. With its moveable lens, you will also be able to zoom the camera to see a specific area that you are interested in. To conclude, it’s “do more with less.”

Note: Sensor/Camera Board NOT included.

  • 1 x Arducam PTZ Pan Tilt Zoom Lens for Raspberry Pi
  • 1 x Controller Board
  • 1 x 15-Pin FPC Cable
  • 1 x XH2.54 Jumper wire with 6-Pin Female Connector

Size

  • Controller Board: 36 x 36 mm
  • 15-Pin FPC Cable: 11.8 in / 30 cm
  • XH2.54 Jumper wire with 6-Pin Female Connector: 11.8 in / 30 cm

  • Focus: Front group: focus | Back group: Zoom
  • Iris: Fixed
  • Storage Condition: -30 ~ +80 ℃;10-90 %RH(No condensing)
  • Operation Condition: -20 ~ +60 ℃;10-90 %RH(No condensing)
  • Pan and Tilt Range: 0-180°
  • Manual Pan and Tilt Step Accuracy: 1°
  • PWM Control Signal Frequence: 50 HZ
  • PWM Control Signal Duty Cycle: 2.5 to 12.5 %
  • Auto Focus Time: 4 to 20 s
  • Zoom Range (Wide => Tele): 2317 steps 0.00396 mm/step
  • Focus Range (Near => Far): 3009 steps 0.0047mm/step